Distribution Board Kits

DIN Rail Kits

IP Enclosures DIN Rail Kits are designed to be easily fitted to IP Enclosures steel and stainless steel electrical enclosures without drilling. The separate internal chassis frame can be fitted with components and wired prior to assembly into the enclosure. The removable escutcheon plates provide protection to the full perimeter of the enclosure.

Chassis Material: Galv Sheet Steel

Escutcheon Plates: UL approved epoxy polyester powder coated with a textured finish. 80-120 micron average thickness. The standard electrical enclosure colour is RAL7035. A full range of other colour options are available upon request.

Slotted Din Rail Material: Electrogalvanised Steel 7.5 x 35 x 2m RoHS, CE Compliant. High quality DIN Rail manufactured from electrogalvanized steel for increased corrosion resistance. Standard 35mm wide symmetrical TS35 DIN Rail compatible with EN50022 and DIN46277-3.
Plating: ALKALI ZINC Cr+3 TOP COAT (10-12 Microns).
Standards: DIN5022, DIN5033, EN60715. RoHS, CE Compliant.
Dimensions: 7.5 mm deep x 35 mm wide x 2000mm long.
Colour: Silver.
Type: TS35 Slotted

(Includes DIN Rail Kit only. Does not include electrical enclosure.)

IP Enclosures DB Kit
Part NumberDimensionConfigurationDownload
SKUPole, H x W (mm)Datasheet
IP-DB1212 Pole to suit 300H x 400W x 200D Enclosure1 row of 12PDF
IP-DB2424 Pole to suit 400H x 400W x 200D Enclosure2 rows of 12PDF
IP-DB3636 Pole to suit 600H x 400W x 200D Enclosure3 rows of 12PDF
IP-DB4848 Pole to suit 400H x 600W x 200D Enclosure2 rows of 24PDF
IP-DB7272 Pole to suit 600H x 600W x 200D Enclosure3 rows of 24PDF
IP-DB9696 Pole to suit 800H x 600W x 200D Enclosure4 rows of 24PDF
IP-DB144144 Pole to suit 1000H x 600W x 250D Enclosure6 rows of 24PDF
IP-DBFILLER10 Pole Filler