Stainless Steel Field Electrical Cabinets
IP Enclosures range of grade 316/316L Stainless Steel outdoor electrical enclosures are suitable for general industrial applications.
Features and Specifications
Protection: IP66 IK10 NEMA 4.
Standard: IEC62208, IEC/EN/AS60529 (IEC/EN/AS61439 Compliant)
Conforming and certified to IEC 62208 – ‘Empty enclosures for low voltage switch gear and control gear assemblies’. For more information regarding design verification for switchboard assemblies, refer to AS/NZS 61439.
– Body: 1.5mm grade 316/316L Stainless Steel
– Door: 1.5mm grade 316/316L Stainless Steel
– Gland Plate: 1.5mm galvanised steel sheet
– Device Mounting Plate: 1.5mm galvanised steel sheet
– Seal: Polyurethane
The robust monoblock body is fabricated using 1.5mm grade 316/316L Stainless Steel. Flat face sealing surfaces
are provided to increase seal life. Integral device plate mounts and M6 earth stud is provided.
The robust surface mounted door is fabricated using 1.5mm grade 316/316L Stainless Steel and incorporates concealed removable hinges with captive pins. The door is designed for a 110° opening. Each door contains integral cable management rail studs, M6 earth stud.
A high quality machine-applied full perimeter UL listed Polyurethane seal foamed in place (FIP) provides
excellent sealing over a long life. Temperature resistance -40°C to 80°C (160°C short term loading).
3 point lock with Pad lockable swing handle.
Device Mounting Plate:
The device mounting plate is fabricated using 1.5mm galvanised steel sheet, pressed to provide additional strength and supplied pre-fitted into enclosure as standard.
3mm aluminium split gland plates are incorporated into the bottom of the enclosure for cable management.
UL approved epoxy polyester powder coated with a smooth finish. 80-120 micron average thickness.
RAL 7035 Grey. (A full range of other colour options are available upon request. Refer to Electrical Enclosure Colours.)